Wholesale and OEM T8 LED tubes for your market. Match the wiring, material and light output to your distribution range or project.
Catalog-led selection • Current specification confirmation • Reply within 24 hours
For T8 replacement projects, the input method is the first purchasing decision. It affects ballast compatibility, installer instructions, packaging labels and after-sales questions.
Designed around compatible electronic ballasts. Provide the ballast brand and model so compatibility can be checked before quotation.
Supports compatible ballast operation and direct AC configurations by selected model. Confirm the intended wiring at order stage.
Direct AC input with single-ended or double-ended options. Installation method must match the supplied wiring diagram.
Choose your tube construction, then match the electrical configuration and light output. Build a focused range for your customers.
Keep the main assortment simple, then add specialist versions only where the market supports them.
Clear or frosted glass options with plastic or aluminum caps, offered in market-specific electrical configurations.
Lightweight polymer tube options for buyers who prioritize handling and breakage resistance.
Aluminum body with a PC cover for applications that need a more robust heat-dissipation structure.
Glass construction with protective film options for buyers who need added containment if breakage occurs.
Water-resistant end-cap configurations are listed for damp environments. Confirm connector and cable requirements.
CCT switching, dimming, Bluetooth, Wi-Fi and microwave sensor families are available by selected model.
Use this matrix for initial sourcing. A model-specific datasheet should control the final order.
| Catalog family | Typical dimensions | Rated power | Performance range | Key selection point |
|---|---|---|---|---|
| US Type A | Ø26 × 590 / 895 / 1199 mm | 9 / 12 / 15 / 18 W | 1300 to 2150 lm by model | Electronic ballast compatibility |
| US Type A+B | Ø26 × 590 / 895 / 1199 mm | 9 / 12 / 15 / 18 W | 1350 to 2000 lm by model | Ballast or direct AC configuration |
| US Type B | Ø26 × 590 / 895 / 1199 mm | 9 / 11 / 12 / 15 / 18 W | 1200 to 2150 lm by model | Single-ended or double-ended direct AC |
| International glass | Ø26 × 590 / 895 / 1199 / 1500 mm | 8 to 30 W | 80 to 160 lm/W by market series | Voltage, input method and cap material |
| PC / Nano | Ø26 × 590 / 895 / 1199 / 1500 mm | 9 to 24 W | 80 to 160 lm/W | PC or nano cover selection |
| ALU+PC | Ø26 × 590 to 2473 mm | 9 to 40 W | 80 to 150 lm/W | G13 or FA8 option by model |
Values are transcribed from the supplied catalog and describe catalog configurations, not a blanket offer. Final datasheets, tolerances and compliance documents should be approved for the exact SKU.
Explore the stages behind a T8 LED tube order, from electronics assembly and tube construction to final visual inspection.
Component placement brings the LED board and driver configuration together. Confirm the specified power, CCT and electrical design before production.
Tube bodies, diffusers and end caps are assembled to the approved configuration, with attention to fit and alignment.
Review tube finish, cap fit and product identification. Agree the electrical and performance checks required for your order.
Give each buyer the information they need at the stage when they need it.
Align voltage, wiring, certifications, carton markings and market-specific models before container planning.
Build a repeatable core range across standard lengths, wattages, CCTs and packaging levels.
Request barcode, retail box and product-data support for clear online listings and fewer compatibility questions.
Match fixture wiring, installation conditions, quantity schedule and required documentation before approval.
The fastest path to a comparable quote is a short specification that covers the fixture, electrical system, product, packaging and destination.
Find the right wiring, construction and order requirements for your market.
Send the wiring type, length, wattage, CCT, tube material, quantity, packaging requirement and destination market.
No. 4, Jiaxing Advanced Business Park, Nanhu District, Jiaxing, Zhejiang, China
*Our team will contact you within 12 hours.Kindly take a patience.
